ElecSimHub

Multi-scenario time-series simulation report

Time-series simulation can compute time slice by time slice, but there is no consolidated report of annual / typical-day time-series results.

Wired, not run yetP2All reportsComputing…
Wiring check (verbatim, from the engine source)Wired under a different switch name (specification name is NOT wired)
PriorityP2
Switch named by the specificationstudyOptions.enableTimeSeriesReport
Wired verbatim in the engine?no（0 evidence）
Engine switches that actually produce this reportenableTimeSeries · enablePvTimeSeries · enableUnbalTimeSeries
Report chapters these switches can appendtime-series · pv-time-series · unbal-timeseries
Built-in chapter list (from the specification)The specification asks for 8 chapter(s); the engine can produce 3 of them for this report.
Standards basisDistributed-generation time-series simulation practice; IEC / IEEE grid-connection time-series assessment requirements.
⚠ The specification switch `studyOptions.enableTimeSeriesReport` is NOT wired. Multi-scenario time-series simulation is implemented under `enableTimeSeries` (`engines/time-series.js`), `enablePvTimeSeries` and `enableUnbalTimeSeries`.
Switch named by the specification ≈ enableTimeSeriesReport · Wired under a different switch name (specification name is NOT wired)

evidence · file:line

Wiring check (verbatim, from the engine source) · evidence
  • enableTimeSeries
    • design.js:1285 · const wantTimeSeries = SO.enableTimeSeries === true;
    • engines/time-series.js:227 · const enabled = (O.requireSwitch === false) ? true : (SO.enableTimeSeries === true);
    • engines/pv-time-series.js:189 · + '并置 studyOptions.enableTimeSeries=true；P0-04 会把该数组按**精确注入**逐点改写该 PV 节点的交流出力'
  • enablePvTimeSeries
    • engines/pv-time-series.js:66 · const SWITCH_MAIN = 'enablePvTimeSeries';
    • engines/pv-time-series.js:68 · 'enablePvTimeSeries', // 任务书字面开关名
    • design.js:1736 · * 开关主名 enablePvTimeSeries（旧名兼容别名由引擎 PVTS.resolvePvTimeSeries 统一解析；缺省 false → 关闭时本块一行不执行）。
  • enableUnbalTimeSeries
    • engines/unbal-timeseries.js:79 · const SWITCH_MAIN = 'enableUnbalTimeSeries';
    • engines/unbal-timeseries.js:145 · switchOff: '不平衡 + 时序联合未开启（studyOptions.enableUnbalTimeSeries 缺省 false，8 个兼容别名任一为 true 即开）→ 无产物、响应零新增字段。',
    • engines/unbal-timeseries.js:51 · * ── 开关：`studyOptions.enableUnbalTimeSeries`（缺省 **false**；兼容别名 8 个见 SWITCH_ALIASES）
Built-in chapter list (from the specification)8 chapter(s)
  1. 1.Report overview: simulation period (typical day / full year), irradiance / load time-series data, model assumptions, case definitions.
  2. 2.Time-series input data: load profile, PV output profile, tariff time series.
  3. 3.Per-slice power-flow results: bus-voltage time series, branch power, network-loss time series.
  4. 4.DER operating results: PV output, storage charge / discharge power, SOC time-series curve.
  5. 5.Limit-violation statistics: hours of voltage-limit violation and hours of overload over the year / simulation period.
  6. 6.Energy-balance statistics: self-consumed energy, curtailed PV energy, total purchased / sold energy.
  7. 7.Compliance summary: power-quality limit-violation statistics over the long time horizon.
  8. 8.Conclusions and engineering recommendations; appendix: time-series data, simulation parameters.
Chapters produced by the engine for this scheme0 / 3

This report has not been run for the current scheme yet.

Nothing is invented: run it, or enable the switches on the relevant tool pages, and the produced chapters appear here.
Conclusions produced for this report0

No conclusion of this report was produced (the report has not been run, or it produced none).

Charts
Required by the specification
  • 24-hour / annual voltage time-series curve
  • SOC time-series curve
  • Power time-series curve
  • Network-loss time-series curve
Produced by the engine (report-charts study)

This report has not been run for the current scheme yet.

Explicitly out of scope (from the specification)4
  • · Quasi-steady-state slice-by-slice algebraic calculation; no continuous time-domain transient simulation.
  • · No second-scale fast fluctuation; the slice step is set by the user.
  • · No dynamic transients from equipment start / stop.
  • · Time-series data is an external input; no random weather-forecast sequence is generated.

Sends one design request with exactly the switches below enabled. Nothing is calculated when the page opens.